1 2
Feed in the wire
electrode
CAUTION!
Risk of injury due to springiness of spooled wire electrode.
▶
When inserting the wire electrode into the 4-roller drive, hold the end of the wire
electrode firmly to avoid injuries caused by the wire electrode springing back.
CAUTION!
Risk of damage to the welding torch from sharp end of wire electrode.
▶
Deburr the end of the wire electrode well before threading in.
1 2
CAUTION!
Risk of injury from emerging wire electrode.
▶
When pressing the "Wire threading" button or the torch trigger, keep the welding
torch away from your face and body, and wear suitable protective goggles.
IMPORTANT! To facilitate exact positioning of the wire electrode, the following procedure
is possible when the "Wire threading" button is pressed and held down.
53
EN-US
To Next Page
Loading...
Need help?
General
