Power Limitation
Safety function "Power limitation" is a safety function for MIG/MAG welding. This means that the power
source can be operated at the power limit whilst maintaining process safety.
Wire speed is a determining parameter for welding power. If it is too high, the arc gets
smaller and smaller and may be extinguished. In order to prevent this, the welding power
is lowered.
If the "MIG/MAG standard synergic welding" or "MIG/MAG pulsed synergic welding" pro-
cess is selected, the symbol for the "Wire speed" parameter flashes as soon as the
safety function trips. The flashing continues until the next welding start-up, or until the
next parameter change.
If the "Wire speed" parameter is selected, for example, the reduced value for wire speed
is displayed.
61
EN-US
To Next Page
Loading...
Need help?
General
