129
EN
Rod electrode
setup parame-
ters:
"Minimum" and "maximum" are used for setting ranges that differ according to power
source, wire-feed unit, welding program, etc.
HotStart time
Unit s
Setting range 0 - 2,0
Factory setting 0,5
To obtain optimum welding results, it will sometimes be necessary to adjust the hotstart
function.
Advantages:
- Improved ignition, even when using electrodes with poor ignition properties
- Better fusion of the base material in the start-up phase, meaning fewer cold-shut de-
fects
- Largely prevents slag inclusions
Rod elec. setup 2nd
Second level of the rod electrode setup
To Next Page
Loading...
