General
Device concept The wire-feed units WF 15i, WF 25i, WF
30i are fitted with a cover for wirespools
with an outer diameter of up to 300 mm
(11.81 in).
Also available is the WF 15i n.S. (no
Spool) variant without an integrated
wirespool holder. The WF 15i n.S. (no
Spool) variant is particularly suitable for ro-
bot and automated applications with an
external wire feeder.
The standard 4-roller drive has excellent wirefeeding properties. The wire-feed units are
also suitable for long hosepacks.
Due to their compact size, the wire-feed units can be used in many different ways.
Warning notices
on the device
The wire-feed unit is fitted with safety symbols and a rating plate. The safety symbols
and rating plate must not be removed or painted over. The safety symbols warn against
operating the equipment incorrectly, as this may result in serious injury and damage.
40,0006,3035
Caution: Parts may be at welding
voltage
Attention: Les pièces peuvent être
à la tension de soudage
1 - 25 m/min 40-984 ipm
360A/100% 450A/60% 500A/40%I2
1.2 A
I11
U11
60 V
U12 I12 0.5 A24 V
IEC 60 974-5/-10 Cl.A IP 23
www.fronius.com
Ser.No.:
Part No.:
WF 15i, WF 25i, WF 30i
19
EN
To Next Page
Loading...
