Contents
Safety rules 5
Explanation of safety notices 5
General 5
Proper use 5
Environmental conditions 6
Obligations of the operator 6
Obligations of personnel 6
Mains connection 6
Protecting yourself and others 7
Danger from toxic gases and vapours 7
Danger from flying sparks 8
Risks from mains current and welding current 8
Meandering welding currents 9
EMC Device Classifications 10
EMC measures 10
EMF measures 11
Specific hazards 11
Requirement for the shielding gas 12
Danger from shielding gas cylinders 12
Danger from escaping shielding gas 13
Safety measures at the installation location and during transport 13
Safety measures in normal operation 13
Commissioning, maintenance and repair 14
Safety inspection 14
Disposal 15
Safety symbols 15
Data protection 15
Copyright 15
General 17
General 19
Device concept 19
Warning notices on the device 19
Controls, connections and mechanical components 21
Controls, connections and mechanical components 23
Safety 23
Front of wire-feed unit 23
Rear of wire-feed unit 24
Wire-feed unit side 24
Wire-feed unit underside 25
Optional control panels 26
Safety 26
OPT/i WF POT control panel 26
OPT/i WF gas test & wire threading 27
OPT/i WF Standard control panel 29
Installation and commissioning 35
Before installation and commissioning 37
Safety 37
Proper use 37
Setup regulations 37
Placing wire-feed unit on swivel pin holder 38
Safety 38
Placing wire-feed unit on swivel pin holder 38
Connecting wire-feed unit to power source 39
Safety 39
General information 39
3
EN
To Next Page
Loading...
