Optional control panels
Safety
WARNING!
Danger from incorrect operation and work that is not carried out properly.
This can result in serious personal injury and damage to property.
▶
All the work and functions described in this document must only be carried out by
technically trained and qualified personnel.
▶
Read and understand this document in full.
▶
Read and understand all safety rules and user documentation for this device and all
system components.
OPT/i WF POT
control panel
The adjusters perform different func-
tions depending on the application.
No. Adjuster function during MIG/MAG welding
(the remote control performs different functions depending on the welding
process)
(1) - Setting the welding power
(during MIG/MAG synergic welding - Standard, Pulse, PMC, LSC)
- Setting the wire speed
(during MIG/MAG standard manual welding)
(2)
- Correcting the arc length
(during MIG/MAG synergic welding - Standard, Pulse, PMC, LSC)
- = shorter arc length
0 = neutral arc length
+ = longer arc length
- Setting the welding voltage
(during MIG/MAG standard manual welding)
No. Adjuster functions during electrode welding
(1) Setting the welding current
26
To Next Page
Loading...
