Fronius WF 15i - Controls, Connections and Mechanical Components; Safety; Front of Wire-Feed Unit

Controls, connections and mechanical components
Safety
WARNING!
Danger from incorrect operation and work that is not carried out properly.
This can result in serious personal injury and damage to property.
▶
All the work and functions described in this document must only be carried out by
technically trained and qualified personnel.
▶
Read and understand this document in full.
▶
Read and understand all safety rules and user documentation for this device and all
system components.
Front of wire-feed
unit
(1)
(4)
(2)
(3)
No. Function
(1) Welding torch connection
for connecting the welding torch
(2) Coolant flow connection (blue) -
is fitted as standard on WF 15i,
WF 15i n.S., WF 30i, as an option
for WF 25i
for connecting the coolant hose
from the welding torch hosepack
No. Function
(3) Coolant return connection (red) - is fitted as standard on WF 15i, WF 15i
n.S., WF 30i, as an option for WF 25i
for connecting the coolant hose from the welding torch hosepack
(4) SpeedNet connection
for connecting system add-ons - for example, a remote control unit
23
EN