Fronius Solar
API
The Fronius Solar API is an Ethernet-based, open JSON interface. When en-
abled, IOT devices on the local network can access inverter information without
authentication. For security reasons, the interface is deactivated at the factory
and should not be activated if it is not required for a third-party application (e.g.
EV charger, smart home solutions, etc.).
For monitoring, Fronius recommends using Fronius Solar.web instead, which
provides secure access to inverter status and production information.
When performing a firmware update to version 1.14.x, the setting of the Fronius
Solar API is adopted. The Solar API is activated for systems with a version below
1.14.x. Above this version it is deactivated but can be switched on and off in the
menu.
Internet Ser-
vices
This menu displays information about the connections and the current connec-
tion status. In case of problems with the connection, a short error description is
shown.
124
To Next Page
Loading...
