Fronius xPrimo GEN24 4.0 Plus - Page 186

DC input data
Limit value and tripping time of the
sudden residual current monitoring
(on delivery)
30 / 300 mA / ms
60 / 150 mA / ms
90 / 40 mA / ms
Limit value and tripping time of the
continuous residual current monitor-
ing (on delivery)
300 / 300 mA / ms
Adjustable range of continuous resid-
ual current monitoring
9)
30 - 300 mA
Cyclic repetition of the insulation res-
istance test (on delivery)
24 h
Adjustable range for the cyclic repeti-
tion of the insulation resistance test
-
DC input data battery
Max. voltage 455 V
Min. voltage 150 V
Max. current 22 A
Max. output 6000 W
DC inputs 1
AC input/output data
Nominal output power (P
nom
) 6000 W
Max. output power 6000 W
Rated apparent power 6000 W
Nominal mains voltage 1 ~ NPE 220V / 230V / 240 V
Min. mains voltage
155 V
1)
Max. mains voltage
270 V
1)
Max. output current 27.5 A
Current (inrush)
6)
20 A / 1.3 ms
Nominal frequency
50 / 60 Hz
1)
Nominal frequency for Full Backup
53 / 63 Hz
1)
Initial short circuit alternating cur-
rent / phase I
K
27.5 A
Total harmonic distortion < 2%
Power factor cos phi
2)
0.8 - 1 (adjustable)
Max. permitted mains impedance Z
max
at PCC
4)
None
Maximum output fault current / dura-
tion
29 A / 3 ms
AC output data PV Point
Max. output power 4133 W (for 5 s)
186