Frontier Fiber Digital Voice - Page 18

19
Phone
Web Portal
To use Outgoing Caller ID Block for one call:
1. Lift the handset and listen for
dial tone.
2. Dial *67 and wait for the
confirmation tone.
3. Dial the number of the person you are
calling.
4. Your Caller ID will be blocked to the
person you are calling.
5. After the call is completed, Caller
ID will resume displaying on calls
you make.
Not available
To turn on Outgoing Caller ID Block for all
calls you make:
1.
Access your Frontier Digital Voice
Web Portal.
2. Select Settings from the menu.
3. Click the Call Settings tab.
4. Click on Outgoing Caller ID Block.
5. Click Turn On Outgoing Caller ID
Block and then OK.
6. Caller ID information will no longer be
sent with your calls until you
reactivate it.
To remove Outgoing Caller ID Block for all
calls you make:
1.
Access your Frontier Digital Voice
Web Portal.
2. Select Settings from the menu.
3. Click the Call Settings tab.
4. Click on Outgoing Caller ID Block.
5. Click Turn Off Outgoing Caller ID
Block, then click OK.
6. Caller ID information will now be sent
with your calls.