EasyManuals Logo

Frontier ST1332 User Manual

Frontier ST1332
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
SAFETY DECALS
9
MTF051059L
WARNING: If safety decals are dam-
aged or missing, replace immediately.
Look for this symbol to indicate important safe-
ty precautions. This symbol indicates: “Atten-
tion! Become Alert! Your Safety Is At Risk.”
Before operation of your snowthrower, read the safety de-
cals as shown on your snowthrower. The cautions and
warnings are for your safety. To avoid a personal injury or
damage to your snowthrower, understand and follow all
safety decals. If you have any questions regarding the
meaning or how to comply with the instructions, do not op-
erate until you understand the purpose for the warning or
danger given in the safety decal. If you do not understand
the meaning, then thoroughly read all safety and operation
instructions in this Owner’s Manual or contact your local
dealer.
If any safety decals become worn or damaged and cannot
be read, order replacement decals from your local dealer.
Identifying Your Snowthrower
The snowthrower has two (2) identifying numbers: (1) unit
model number: (2) unit serial number. The two preceding
numbers are required to insure that the proper replace-
ment parts are obtained when required. If you have any
questions concerning parts, service, or technical data, con-
tact the dealer where the unit was purchased.
For complete warranty information refer to the warranty in
the Owner’s Information section of this manual.
Figure 1

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Frontier ST1332 and is the answer not in the manual?

Frontier ST1332 Specifications

General IconGeneral
EngineBriggs & Stratton Intek Snow OHV
Horsepower13 hp
StarterElectric / Recoil
Fuel Capacity4 quarts
Drive SystemHydrostatic
SpeedsVariable Fwd/Rev
Traction ControlWheel Lock
Clearing Width32”
Auger Diameter16”
Auger TypeSteel / Saw Tooth
Impeller Diameter12”
Chute RotationElectric
Chute Turning Radius190
Deflector ControlRemote
Warranty - Engine3 years
Warranty - Machine3 years
Weight and Dimensions IconWeight and Dimensions
Tire Diameter16”
Housing Height23.5”
Weight307 lbs

Related product manuals