5. Grab the Standard Mounting Bracket and 4 mini screws.
6. Position the Standard Mounting Bracket over the
Optional Mounting Wedge so the four holes line up.
7. Screw in each of the 4 mini screws by hand until secure.
Attaching The Wireless Doorbell Camera
Because the Wireless Doorbell Cameras doesn’t ship
fully charged, you may opt to charge your battery at
this time. Please refer to page 19 for help. Otherwise,
please proceed to the steps below:
1. Align the prongs on the back of the Wireless
Doorbell with the 4 rectangular slots on the mount.
6
7
13
1
8
To Next Page
Loading...