6. Enter Command
The Enter Command interface lets you test proper connection and function by entering and executing command strings.
You can use this to verify the correctness of a command before you enter it into an Action. For serial commands, it can
also be used to see any data returned from the remote device.
• Choose Enter Command
• Select a test command from the drop-down menu (the test command will appear in the Send Command window):
• For Serial:
• Serial Transmit - #COMxx[“”] TX
• Serial Receive - #COMxx[] RX
• For Infrared:
• IR- Out Universal Command- #XROxx[F2] output
• Learn Universal IR code - #XRI1 [F2] input (universal header uses fixed 40K, user can modify)
• For TCP:
• NET Command (TCP) - #NET[F1,...]
• For test command:
• Alarm Command #ALM[”ON”]
• Click Send CMD
• The Receive Command field is populated when it receives a response back from a connected serial device
27
To Next Page
Loading...
Need help?
General