7
Your CB2000s need a script to tell them what the buttons should do, what other devices they need to communi-
cate with, and how. If your configuration — the collection of commands you want to issue from the CB2000 and the
devices you want to control — is the same in each room in your installation, then you will need only one configuration
base file which you will modify with specific IP addresses unique to each room. If the situation is different from room
to room, you will need different base files that are tailored to each configuration.
There are several ways to create your configuration files:
• Go to www.gofrontrow.com/products/ezroom and find the Base Configuration File library under the Resources
tab. Each Base Configuration File stored here includes both the user interface and control logic programming
needed for the most common applications. Note that if you are using the CB50 volume control as part of your
installation, you will need the CB2050 configuration files.
• If your configuration is uncommon enough that it’s outside the scope of the Base Configuration File library, and
you have some basic familiarity with programming, you can easily build your own user interface designs or
control logic programming. See Appendices A, B, and C for a detailed description of how to do this.
Step 2:
Getting Your Configuration Files
To Next Page
Loading...
Need help?
General