Need help?Do you have a question about the FrontRow CB200 and is the answer not in the manual?
General| Manufacturer | FrontRow |
|---|---|
| Product Type | Control Panel |
| Compatibility | Compatible with FrontRow audio systems |
| Display | Touchscreen |
| Connectivity | Ethernet |
| Ports | Ethernet, USB |
Welcomes the user and explains the guide's purpose in facilitating CB2000 installation.
Illustrates a typical system setup with various connected devices for a clear installation objective.
Familiarizes installers with the back of the CB2000, detailing ports like Network, AUX, and I/O.
Guides on planning what devices to control and how, with an example of an ezRoom setup.
Illustrates connections for using CB2000 with TB14 adapter for projector and amplifier control.
Shows wiring for CB2000 as a standalone controller using TB6 and TB8 adapters.
Explains the need for configuration scripts and where to download or create them.
Provides step-by-step instructions on how to assemble the CB2000 control panel with button caps.
Lists required tools, IP addresses, and planning templates for efficient CB2000 configuration.
Details connecting CB2000 to CM3000 for power and configuration via the 'Network Only' jack.
Details connecting CB2000 to TB14 adapter for power and configuration via the 'AUX' jack.
Details connecting CB2000 to TB8 adapter for power and configuration via the 'AUX' jack.
Provides instructions for setting a static IP address on Windows XP and Windows 7 for configuration.
Provides instructions for setting a static IP address on Mac OS X for configuration.
Steps to load the configuration file into the CB2000 via a web browser, including macro definitions.
Instructions on how to define the CB2000's IP address and save its network configuration settings.
Lists the necessary materials (boxes, raceway, ties) and tools (drill, screwdriver, ladder) for installation.
Outlines essential safety guidelines, including avoiding water/heat and using safety goggles.
Recommends locating the CB2000 conveniently for the instructor, near the whiteboard and teacher's desk.
Instructions for installing boxes and connecting Cat 5 cable to CB2000's Network jack with CM3000.
Details connecting CB2000 via Cat 5 cable to the AUX jack of TB12, TB6, or TB8 adapters.
Wiring guidance for serial and IR control using the TB14 adapter and its RS232/IR connectors.
Shows specific wire color functions and connections for TB8 and TB6 adapters with the CB2000.
Instructions for connecting the CB50 volume control to the CB2000 using a ribbon cable.
Explains how to access the CB2000's configuration interface through a web browser.
Details creating Macros to represent IP addresses of controllable devices for easier configuration.
Guides on creating Events that trigger specific Actions, initiated by button presses or schedules.
Instructions on testing events and saving configurations, including a table of pre-defined events.
Details how to define Actions using templates like NET, HTP, Serial Transmit, and IR-Out commands.
Explains the syntax for Network (NET) and Intercom (HTP) commands used in actions.
Details syntax for Serial (COM), IR-Out, and Alarm commands for device control.
Guides on using the CB2000's IR learning mode to capture commands from infrared remotes.
Explains how to use the Enter Command interface to test serial, IR, TCP, and alarm commands.
Instructions for accessing the CB2000 interface and assigning a custom name for network identification.
Guides on setting a web access password and configuring touch panel lock settings for security.
Details adjustments for communication settings like IP address, subnet mask, and name servers.
Covers COM port, baud rate, stop bits, and parity settings for serial device communication.
Instructions for setting the CB2000's internal time and managing Daylight Saving Time transitions.
Explains how to load existing configuration files or save the current one as a template.
Lists commands for controlling audio input, mute, and volume on the CM3000 amplifier.
Details commands for managing audio input, volume, and mute status on the CA1000 amplifier.
Details the pin assignments for the CB2000's I/O port, including wire color and function.
Provides the pinout for the LAN RJ-45 connector on the CB2000, specifying transmit/receive and power pins.
Offers solutions for problems like inability to communicate with the CB2000 after connection.
Suggests using the SpyGlass app to locate a programmed CB2000's IP address.
To Next Page