10
b. With TB14 as power source
WARNING: TO AVOID DAMAGE TO THE DEVICE, IN THIS CONFIGURATION
CONNECT THE TB14 TO THE CB2000’S ‘AUX’ JACK!
TB14
Adapter
CB2000
Control
Panel
Computer
Power
Control cable
Signal + control
ezRoom mounting plate
Cat 5 cable
Other cable
NOTE: This is a schematic illustration
intended to clarify the relationship of
components to each other. The location
of jacks shown here may not reflect their
true position on specific devices.
AUX
POWER IN
AUX NETWORK NETWORK
c. With TB6/TB8 as power source
WARNING: TO AVOID DAMAGE TO THE DEVICE, IN THIS CONFIGURATION
CONNECT THE TB8 TO THE CB2000’S ‘AUX’ JACK!
CB 2000
Control
Panel
Computer
Power
Control cable
Signal + control
ezRoom mounting plate
Cat 5 cable
Other cable
NOTE: This is a schematic illustration
intended to clarify the relationship of
components to each other. The location
of jacks shown here may not reflect their
true position on specific devices.
AUX NETWORK NETWORK
TB6 Adapter
TB8
Adapter
GREEN
YELLOW
PWR
GND
PWB