To Next Page

To Previous Page

3. Web Access Password

To set a password to deter configuration changes by network hacks:

• Choose User ID/Password

• Type in the old password (the default is ‘calypso’)

• Enter/re-enter the new password

• Click Save Settings in the top section

• Select Admin from the Security Level drop-down

• Click Save Settings in the middle section

Select the conditions upon which the CB2000 panel will lock under Lock Panel Mode:

• Off (i.e. the panel will never lock)

• Timeout (the panel will lock after a defined period of inactivity)

• Pad-Press Press (the panel will only lock if the user presses two buttons simultaneously)

• Both (the panel will lock either upon pressing two buttons simultaneously or upon a defined period of inactivity)

• Enter the delay in minutes between the last button press and locking under Timeout Period

• Set a Password for unlocking the panel (the default is 1357; must be a 4- digit odd number). The user types the

password or the keypad of the CB2000 to unlock it, with the digits corresponding to the following button positions:

• Click Save Settings in the bottom section

You can also use the Lock/Unlock Now buttons to test the behavior or initiate modes remotely.

FrontRow CB200 User Manual

Questions and Answers: