7
Step 4: Configuring the CM900
Your CM900 has several parameters that can be configured to tell it how to communicate with other devices in an ezRoom or
Conductor installation. While each installation is different most of the default parameters will be appropriate.
1. Access CM900
Open a web browser on your laptop and in the URL field type the IPv4 address 192.168.1.103 and press enter. This is the default
static IP address of the CM900 and will likely be changed when you configure it per the school’s IP addressing scheme.
• You will be connected to your CM900 and see a screen like this:
To Next Page
Loading...
Need help?
General