5
Your CM900 needs information about the other devices it needs to communicate with, and how. If your configuration —
the collection of commands you want to issue from CM900 and the devices you want to control — is the same in each
room in your installation, then you will need only one configuration base file which you will modify with specific
IP addresses unique to each room. If the situation is different from room to room, you will need different base files that
are tailored to each configuration.
There are several ways to create your configuration files:
• Go to gofrontrow.com/guides-resources and find the Configuration Files & Scripts section, then the ezRoom
heading. Each Base Configuration File stored here includes the control logic programming needed for the most
common applications.
• If your configuration is uncommon enough that it’s outside the scope of the configuration files, and you have some
basic familiarity with programming, you can easily build your own user interface designs or control logic programming.
When configuring your CM900, we recommend using Chrome, Firefox or Safari browsers.
Step 2:
Getting Your Configuration Files
To Next Page
Loading...
Need help?
General