EasyManua.ls Logo

Frymaster H14 Series - Shortening Disposal Unit (SDU) Operation

Frymaster H14 Series
49 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4-9
4.1.3 Shortening Disposal Unit
CAUTIONS AND WARNINGS (Read Before Using SDU)
Ø Do not turn fryer on with frypot empty.
Ø Exercise extreme caution when working with hot oil/shortening.
Ø Do not overfill tank past the capacity mark on tank.
Ø Do not tilt or move SDU unless the cover is closed and latched.
Ø Do not pump water or cleaning compounds through unit. Damage may occur.
Ø Do not allow shortening to solidify in the tank. Discard into an appropriate storage
container immediately.
OPERATION
1. Turn fryer off.
2. Remove oil filter pan from filter base. Slide
filter base back into fryer without filter pan
installed. Ensure the disposal unit crumb
screen is clean and properly installed.
3. Position the SDU in the filter base opening,
under the fryer drain and open drain valve
slowly to avoid splashing.
Clean crumb screen in place
SDU properly positioned in filter base opening

Other manuals for Frymaster H14 Series

Related product manuals