Opening the Console
Closing the Console
1. Release the lock and pull the KVM console.
2. Pull the KVM console all the way out until it clicks into place;
3. Open the LED panel to display the LED screen; the LED panel can be rotated up to 108°.
1. Close the LED panel and the power will automatically shut down.
2. Push the release catch in the direction of the arrow; push the LED panel all the way in until it
automatically locks up.
3. Lock the LED panel.
Opening & Closing the Console
KVM-080217IP/KVM-160217IP
NOTE: The lock can only do horizontal locking, it can’t bear any load.
UNLOCK
UNLOCK
UNLOCK
108°
LOCK
LOCK
108°
KEY
RELEASE CATCH
To Next Page
Loading...
