FS KVM-160217IP - Hardware Overview; Front Panel Buttons

Hardware Overview
Front Panel Buttons
16 Port KVM
Station ID
ONLINE SELECTED
KVM over IP
1
9 10 11 12 13 14 15 16
2 3 4 5 6 7 8
RESET
SCAN
HD＆Matrix
Buttons Components Function
1~8/16 Port Selection Switch freely from port 1 to port 8/16.
Press [1] and [2] at the same time for three seconds to
reset the keyboard and mouse.
Press [5] to enhance the brightness after entering
brightness adjusting mode, or enhance the denition
after entering denition adjusting mode.
First, press the port button which is going to be set.
Then start to adjust the mode.
Press [4] for three seconds to enter denition adjusting
mode.
Number 44 is ashing on the LED tube.
Then press [5] and [6] to adjust.
Press [4] to exit or wait for ve seconds and it will
auto-exit.
First, press the port button which is going to be set.
Then start to adjust the mode.
Press [3] for three seconds to enter brightness
adjusting mode.
Number 33 is ashing on the LED tube.
Then press [5] and [6] to adjust.
Press [3] to exit or wait for ve seconds and it will
auto-exit.
1
2
3
Reset
Brightness
Denition
Adjust +
4
5