Grounding the KVM Switch
1. Connect one end of the grounding wire to a proper earth ground, such as the rack in which the
KVM switch is mounted.
2. Secure the grounding lug to the grounding point on the KVM switch's back panel with the washers
and screws.
1. Attach the switch to the rack using six M6 screws and nuts.
2. Slide the rack-mount kit into the switch’s side mounting brackets from the back to the front, then
screw the rack-mount kit to the rack.
NOTE: The rack-mount kit is provided for KVM-080217IP and KVM-160217IP only.
V
LAN
DC
RS
To Next Page
Loading...
