FUHR multitronic 881 - Default Chapter; Table of Contents

2
WWW.FUHR.DE
multitronic
881/881GL/ServoAccess
Content
1 Introduction 3
2 Important information/safety instructions 4
2.1 Basic components | Setting possibilities 5
2.2 certifications | labelling of the locks 6
2.3 Scope of supply of a multitronic-set 8
3 Installation examples 10
3.1 Version 1 – Standard – with cable junction/without control unit 10
3.2 Version 2 – Standard – with tappet contact/without control unit 12
3.3 Version 3 – Standard – with tappet contact and switching power supply unit on the frame/ without control unit 14
3.4 Version 4 – Standard – All-inclusive for installation in the door 16
3.5 Version 5 – Project – All-inclusive with DIN rail components 18
3.6 Version 6 – Project – All-inclusive with control box 20
4 Installation instructions 22
4.1 Routing and drilling operations 22
4.2 installation 27
5 Commissioning 34
5.1 Operation verification check on the fabricator’s premises 34
5.2 Commissioning on site 34
6 External connection options 35
6.1 THE Control unit 36
6.2 The radio receiver 41
6.3 The drive unit’s multi-functional jack 42
7 Wiring diagram 43
8 Control via FUHR radio access control systems 44
8.1 The programming keys 44
8.2 Tuning in and deleting user radio keys 45
9 Maintenance and care 48
9.1 Contact device 49
9.2 Battery change of the radio keys 50
10 Technical data 51
10.1 multitronic-Set 51
10.2 Master/user radio key 51
10.3 4-channel radio key with wall bracket 51
10.4 multitronic control with radio receiver 52
10.5 Radio receiver 52
10.6 multitronic drive unit 52
10.7 multitronic switching power supply unit (installation in the door frame) 53
11 Troubleshooting 54
11.1 Use with the radio receiver module 55
12 Optional accessories 56
For this manual in other languages see www.fuhr.de
www.fuhr.de
www.f
u
hr.
de
Important advices which have to be noticed