48
WWW.FUHR.DE
multitronic
881/881GL/ServoAccess
9 Maintenance and care
The further points raised here provide supplementary information to the FUHR Product Liability Infor-
mation for door locks, see www.fuhr.de. The importance of their compliance must be pointed out to
builders and users alike. In the event of non-compliance with these imperative instructions, faultless
system operation cannot be warranted. The FUHR autotronic lock may only be used in conjunction with
the components supplied. Failure to do so invalidates warranty issues.
All safety-relevant hardware must be checked at least annually for both wear and tear, and if mechanically secured. Depen-
ding on the requirements, fixing screws must be tightened or the damaged or worn parts exchanged for original parts by a
specialised company.
Additionally all movable parts and locking points must be lubricated and their function must be checked. Only cleaning and
maintenance agents that do not damage the corrosion protection of the hardware components are to be used.
Hardware adjustments as well as replacing hardware components must be carried out by a specialist company.
We recommend ensuring and documenting the maintenance via a maintenance contract with a specialist company.
To Next Page
Loading...
