44
WWW.FUHR.DE
multitronic
881/881GL/ServoAccess
8 Control via FUHR radio access control systems
8.1 THE PROGRAMMING KEYS
The master key cannot be deleted or switched at a later stage. It should therefore be kept safely, as ad-
ditional keys cannot be tuned in or deleted should it be lost.
Each control unit comes with a radio receiver. To the scope of delivery of a control unit or a
radio receiver module a master radio key with red buttons is included. With the help of the master
radio key, 25 user radio control keys or any other FUHR access system can be tuned in. All radio keys
are copy protected by means of a ‘rolling code system’. The middle button of the master key has alrea-
dy been programmed to the control unit or the radio receiver module in the factory.
In the following, the pairing and deletion of 3-channel radio keys is described. Each of the keys (chan-
nels) can be assigned individually, e.g. for front door, garage door, property gate and lighting.
The handling of other FUHR radio transmitters (finger scan, keyboard, transponder etc.) is analogous. Detailed information:
www.fuhr.de.
For the connection of external access controls, please refer to the wiring diagram in chapter 7 and the corresponding
instructions.
Integrated radio receiverDIN rail controller
Programming
button
Radio receiver module
LED-
Programming
button
To Next Page
Loading...
