Fuji Xerox ApeosPort-V C5580

Output Format
153
Copy
3
 On
Adds prefix text and page numbers onto copies.
 Prefix
Allows you to enter prefix text with up to 16 characters, using the displayed keyboard.
 Number of Digits
Displays the [Bates Stamp - Number of Digits] screen.
You can select [Auto Assign] or [Manual Assign]. When you select [Manual Assign], you can
specify the number of digits to be used for page numbers in the range from 1 to 9 in 1 digit
increments.
 Apply To
Displays the [Apply Bates Stamp To] screen.
Refer to "[Apply Bates Stamp To] Screen" (P.153).
 Position
Displays the [Bates Stamp - Position] screen.
You can select a prefix and page-number position from six options.
For side 2 of copy sheets, you can select [Same as Side 1] or [Mirror Side 1].
 Font Size
Displays the [Bates Stamp - Font Size] screen.
You can select a prefix and page-number size from three options, or can directly specify a
size in the range from 6 to 24 points in 1 point increments.
[Apply Bates Stamp To] Screen
This screen allows you to specify a page range to add prefix text and page numbers.
1 Select any option.
 All Pages
Adds prefix text and page numbers to all pages.
 Starting Page Number
Allows you to specify the start page to add prefix text and a page number, in the range from
1 to 9999.
Note • Use [+] and [-], or the numeric keypad to enter the start page number.
 Ending Page Number
Allows you to specify the end page to add prefix text and a page number, in the range from
1 to 9999.
Note • Use [+] and [-], or the numeric keypad to enter the end page number.