3 Copy
106
Copy
3
Image Quality
The section describes the features you can select on the [Image Quality] screen. The
following shows the reference section for each feature.
Original Type (Selecting the Document Type)............................................................................................... 106 Component
Image Options (Adjusting Copy Density/Sharpness/Saturation of Images)......................................... 107 Component
Image Enhancement (Erasing the Background Color of Documents/Adjusting Contrast)................ 108 Component
Color Effects (Selecting an Image Quality) ....................................................................................................109 Component
Color Balance (Adjusting Color Balance)........................................................................................................ 110 Component
Color Shift (Adjusting the Color Tone).............................................................................................................111 Component
1 Select [Copy] on the Services Home screen.
2 Select a feature on the [Image Quality] screen.
Note •If the color reproduction is unsatisfactory,
perform calibration. For information on
calibration, refer to "3 Maintenance" >
"Executing Calibration" in the Administrator
Guide.
Original Type (Selecting the Document Type)
This feature allows you to select the type of documents, such as text and photos. By
selecting a document type, you can make copies at optimum image quality.
1 Select [Original Type].
2 Select any option.
Auto
Automatically sets the document type based on
the setting made in the System Administration
mode and the setting made in [Output Color] on
the [Copy] screen.
Photo & Text
Select this option when the document contains both text and photos. The machine
automatically distinguishes the text and photo areas of the document and sets the
To Next Page
Loading...
Need help?
General
