Store to WSD
297
Scan
5
2 Load the document on the document glass or
in the document feeder, and select [Operate
From Computer].
3 The standby screen is displayed on the touch
screen.
Note •Select [Delete] to exit standby mode. After
exiting standby mode, [Remove Your
Originals] screen is displayed on the touch
screen.
4 Operate scan from a network computer. To operate scan from a network computer, use
application which supports image loading feature such as [Windows Fax and Scan]. The
following describes the method using [Windows Fax and Scan] with Windows 7.
Note •This method is not available for computers with Windows Vista Home Basic or Windows Vista Home
Premium. To operate scan from such a computer, use another method, for example, selecting [From
Scanner or Camera] in the Paint application.
1) Click the [Start], click [All Programs], and then click [Windows Fax and Scan].
2) Click [Scan] at the bottom of the left pane, and then click [New Scan] on the toolbar.
3) In the [New Scan] dialog box, click [Change], and then select the machine.
4) Check that the machine model name is displayed to the right of [Scanner:].
Note •If the machine model name is not displayed, click [Change] and select the machine.
5) Click the [Profile] list, and then select [Document].
6) Specify the settings as necessary, and then click [Scan].
5 After being scanned, the scanned data is forwarded to the specified computer.
6 [Store to WSD - Remove Your Originals] screen
appears on the touch screen after a scan job
has been completed. Remove the originals
from the document glass and then click [OK].
Note •If the standby screen is not displayed, a scan
job will not be started even when the network
computer recognizes the machine.
• Select [Delete] to abort an operation. After
an operation is aborted, [Store to WSD -
Remove Your Originals] screen is displayed on the touch screen.
• The machine will not enter the Power Saver mode while the standby screen is displayed. For
information on Power Saver mode, refer to "Power Saver Mode" (P.66).
This Device (Storing Data Scanned by the Machine on a Network Computer)
You can forward the data scanned with the command from the machine to a specified
computer on the network.
Note •WSD stands for Web Services on Devices.
To Next Page
Loading...
