Printing and Deleting Stored Jobs
389
Job Status
11
Output Color
Displays the output color of the document to be printed.
2 Sided Printing
Displays 1 Sided, Flip on Short Edge, and Flip on Long Edge.
Booklet Creation
Displays Left/Top Bind and Right/Bottom Bind.
Note •This item is displayed when the booklet layout is set using a printer driver.
• When the orientation of booklet creation cannot be detected, "Booklet Creation" is displayed only.
Print
Prints the Private Charge Print job. After printing, the job is deleted.
Refer to "When [Print] is Selected" (P.389).
When [Print] is Selected
1
Specify how to process the job after printing.
Note •The screen as shown on the right does not
appear if [Print Job Confirmation Screen] is
set to [Disabled] in the System
Administration mode. If [Disabled] is
selected, the machine automatically deletes
the job after printing without displaying the
confirmation screen. For more information,
refer to "5 Tools" > "Stored File Settings" >
"Print Job Confirmation Screen" in the
Administrator Guide.
Print and Delete
Starts printing the job. After printing, the job is deleted.
Print and Save
Starts printing the job. After printing, the job remains undeleted.
Cancel
Cancels printing the job.
Public Folder
This feature allows you to store data in the machine and send the data by operating on a
remote machine.
The following describes how to print or delete a job stored in a public folder.
For information on how to operate public folders, refer to "Store for Polling (Storing Files on the Machine that a Remote
Machine can Retrieve)" (P.213).
Note •This feature does not appear for some models. For more information, contact our Customer Support
Center.
To Next Page
Loading...
Need help?
General
