Fuji Xerox DocuPrint CP105 b - Firmware Errors

109 Using the Operator Panel
 Firmware Errors
Contact the Fuji Xerox local representative office or an authorised dealer if this error occurs
repeatedly.
See also:
• "Online Services" on page 181
1 234567Cause/Remedy
Toner
Energy
Saver
Jam Start Error Load
Paper
Ready/
Data
YMCK
——— ——— —
A firmware error
occurred.
Press the
(Cancel Job) button
to clear the error.
See "Canceling a
Print Job" on
page 90.
—— ——— —
A ROM erasing error
occurred.
Turn off the printer,
and then on.
— ——— —
A ROM writing error
occurred.
Turn off the printer,
and then on.
——— —
An error occurred
while downloading
the firmware.
Turn off the printer,
and then on.