Maintenance 174
Checking Page Counts (Windows Only)
The total number of printed pages can be checked at the Printer Setting Utility. Four meters are
available:
The Meter Reading counts the number of pages printed properly. Single side color print (including
Multiple-Up) is counted as one job, and 2-sided print (including Multiple-Up) is counted as two. During
2-sided printing, if an error occurs after one side is printed properly, it is counted as one.
When printing color data, which has been converted by using ICC profile on an application, with the
Color setting, the data is printed by color even if it seems to be black and white data on the monitor. In
that case, Meter 1 and Meter 4 are increased.
When doing 2-sided printing, a blank page may be inserted automatically depending on the settings of
the application. In this case, the blank page is counted as one page. However, when doing 2-sided
printing for odd number of pages, the blank page inserted to the rear side of the last odd page is not
counted.
The following procedure uses Windows XP as an example.
To check a meter at the Printer Setting Utility:
1 Click start → All Programs → Fuji Xerox → Fuji Xerox Printer Software for Asia-Pacific →
FX DocuPrint CP105 b
→ Printer Setting Utility.
NOTE:
• The Select Printer window appears in this step, when multiple print drivers are installed on your
computer. In this case, click the name of the desired printer listed in Printer Name.
The Printer Setting Utility appears.
2 Click the Printer Settings Report tab.
3 Select Menu Settings from the list at the left side of the page.
The Menu Settings page is displayed.
4 Check the values for each meter under Meter Reading.
Meter 1 Displays the total number of color prints.
Meter 2 Displays the total number of monochrome prints.
Meter 3 Displays the total number of large size color prints.
Meter 4 Displays the total number of color and monochrome prints (Meter 1 +
Meter 2).
To Next Page
Loading...
Need help?
General
