Troubleshooting 124
Print Quality Problems
This section includes:
• "The Output Is Too Light" on page 125
• "Toner Smears or Print Comes Off/Stain on Back Side" on page 126
• "Random Spots/Blurred Images" on page 127
• "The Entire Output Is Blank" on page 128
• "Streaks Appear on the Output" on page 129
• "Pitched Color Dots" on page 130
• "Vertical Blanks" on page 131
• "Mottle" on page 132
• "Ghosting" on page 133
• "Fog" on page 134
• "Bead-Carry-Out (BCO)" on page 135
• "Auger Mark" on page 136
• "Wrinkled/Stained Paper" on page 137
• "The Top Margin Is Incorrect" on page 138
• "Color Registration Is out of Alignment" on page 139
• "Protrudent/Bumpy Paper" on page 140
NOTE:
• In this section, some procedures use the Printer Setting Utility or SimpleMonitor.
See also:
• "Printer Setting Utility (Windows Only)" on page 45
• "SimpleMonitor (Windows Only)" on page 46
To Next Page
Loading...
Need help?
General
