39 Basic Operation
Power Saver Mode
The printer has a power saving feature which reduces power consumption during periods of inactivity.
This feature operates in two modes: the Mode 1 and Mode 2. The power consumption of the printer in
Mode 2 is lower than in Mode 1. As delivered, the printer switches to the Mode 1 five minutes after the
last print job is printed. The printer then switches to the Mode 2 after another six minutes of inactivity.
When the printer is in the Mode 1, all lamps on the operator panel except for the (Energy Saver)
indicator and the indicator announcing that a problem occurs go out. In the Mode 2, all lamps on the
operator panel except for the (Energy Saver) indicator go out.
The factory default settings of five minutes (Mode 1) and six minutes (Mode 2) are changeable within
the range of 5 to 30 minutes (Mode 1) and 1 to 6 minutes (Mode 2). The printer returns to the ready-to-
print state in about 25 seconds when re-activated.
To Next Page
Loading...
Need help?
General
