33 Basic Operation
Operator Panel
The operator panel has two buttons and several indicators that show the status of the printer.
1 Toner Indicators
• Indicates that the toner is low or empty, or toner error occurred.
2 (Energy Saver) Indicator
• Indicates that the printer is in the Power Saver Mode.
3 (Jam) Indicator
• Indicates that a paper jam occurred.
4 (Cancel Job) Button
• Press this button to cancel a job or clear an error.
5 (Start) Button/Indicator
• Press this button to start 2 sided printing after loading paper.
• Press and hold this button to print the report pages.
6 (Error) Indicator
• Indicates that an error occurred.
7 (Load Paper) Indicator
• Indicates that no paper is loaded or the wrong size of paper is loaded.
8 (Ready/Data) Indicator
• Indicates the printer status, such as receiving and printing data.
The indicators provide information on the status of the printer and help you locate each problem.
K
C
Y
M
1
2
3
4
5
6
7
8
To Next Page
Loading...
Need help?
General
