Fuji Xerox DocuPrint M375 z

To Next Page

To Previous Page

332

Home > Network > Additional Methods of Configuring Your Fuji Xerox Machine for a Wireless Network > Use

Wi-Fi Direct

> Configure Your Wi-Fi Direct Network > Configure Your Wi-Fi Direct Network Using the One-

Push Method

Configure Your Wi-Fi Direct Network Using the One-Push Method

If your mobile device supports Wi-Fi Direct, follow these steps to configure a Wi-Fi Direct network.

When the machine receives the Wi-Fi Direct request from your mobile device, the message [Wi-Fi

Direct connection request received. Press [OK] to connect.] will appear on the LCD.

Press [OK] to connect.

Press [] [Settings] > [All Settings] > [Network] > [Wi-Fi Direct] > [Push Button].

Activate Wi-Fi Direct on your mobile device (see your mobile device's user's guide for instructions) when

[Activate Wi-Fi Direct on other device. Then Press [OK].] appears on the machine's LCD.

Press [OK] on your machine.

This will start the Wi-Fi Direct setup. To cancel, press .

Do one of the following:

• When your Fuji Xerox machine is the Group Owner (G/O), connect your mobile device to the machine

directly.

• When your Fuji Xerox machine is not the G/O, it displays available device names with which to configure a

Wi-Fi Direct network. Select the mobile device you want to connect to. Search for available devices again

by pressing [Rescan].

If your mobile device connects successfully, the machine's LCD displays [Connected]. You have completed

the Wi-Fi Direct network setup.

Related Information

• Configure Your Wi-Fi Direct Network

Fuji Xerox DocuPrint M375 z - Page 332