Fuji Xerox DocuPrint M375 z

To Next Page

To Previous Page

333

Home > Network > Additional Methods of Configuring Your Fuji Xerox Machine for a Wireless Network > Use

Wi-Fi Direct

> Configure Your Wi-Fi Direct Network > Configure Your Wi-Fi Direct Network Using the One-

Push Method of Wi-Fi Protected Setup

™

(WPS)

Configure Your Wi-Fi Direct Network Using the One-Push Method of Wi-

Fi Protected Setup

™

(WPS)

If your mobile device supports WPS (PBC; Push Button Configuration), follow these steps to configure a Wi-Fi

Direct network.

When the machine receives the Wi-Fi Direct request from your mobile device, the message [Wi-Fi

Direct connection request received. Press [OK] to connect.] will appear on the LCD.

Press [OK] to connect.

Press [] [Settings] > [All Settings] > [Network] > [Wi-Fi Direct] > [Group Owner].

Press [On].

Swipe up or down or press

▲

▼

to select the [Push Button] option. Press [Push Button].

Activate your mobile device's WPS one-push configuration method (see your mobile device's user's guide for

instructions) when [Activate Wi-Fi Direct on other device. Then Press [OK].] appears on

the machine's LCD. Press [OK] on your Fuji Xerox machine.

This will start the Wi-Fi Direct setup. To cancel, press .

If your mobile device connects successfully, the machine's LCD displays [Connected]. You have completed

the Wi-Fi Direct network setup.

Related Information

• Configure Your Wi-Fi Direct Network

Fuji Xerox DocuPrint M375 z - Page 333