32
11
Align the “ ” mark on the film carrier with the
rail and push the carrier all the way in.
12
Click [OK].
• The Scanner Correction screen appears.
3.3.3 Auto Film Carrier NC135Y
Cleaning
Do not use spray cleaners containing combustible
substances as these constitute a fire hazard. Magnet
cleaner (MC-100) is extremely flammable.
• Do not smoke or allow flames near it.
• Close the bottle cap securely immediately after
moistening the cotton swab.
• Store magnet cleaner (MC-100) in a safe place
under low temperature.
•Take care not to inhale its vapor. If you have inhaled
the vapor excessively, immediately move to a place
having fresh air.
• If magnet cleaner (MC-100) comes in contact with
the eyes, eyes rinse immediately with large
amounts of water and get prompt medical attention.
1
Pull the release lever as shown in the figure, to
release the pressure cover.
2
Remove any dirt and dust adhering to the dust
removal rollers.
Rail
Mark
Film Carrier NC240Y
EZ1162
Pressure Cover
Release Lever
EZ631
Dust Removal Rollers
EZ1597
F350/370
distributed by www.minilablaser.com
To Next Page
