FujiFilm X-Pro3 - MIC;Remote Release; Time Code Setting

163
6
The Shooting Menus
MOVIE SETTING
MIC/REMOTE RELEASE
Specify whether the device connected to the microphone/re-
mote release connector is a microphone or a remote release.
Options
Options
m MIC n REMOTE
TIME CODE SETTING
Adjust time code (hour, minute, second, and frame number) dis-
play settings for movie recording.
TIME CODE DISPLAY
Select ON to display time codes during movie recording and
playback.
Options
Options
ON OFF
START TIME SETTING
Choose the time code starting time.
Option
Option
Description
Description
MANUAL INPUT
Highlight this option and press the focus stick (focus lever)
right to choose a start time manually.
CURRENT TIME
Set the start time to the current time.
RESET Set the start time to 00:00:00.
COUNT UP SETTING
Choose whether time is clocked continuously or only during
movie recording.
Option
Option
Description
Description
REC RUN Time is clocked only during movie recording.
FREE RUN Time is clocked continuously.