29
2
First Steps
Attaching the Strap
4
Place the strap clip on an eyelet.
Hook the strap eyelet in the clip
opening. Remove the tool, using the
other hand to keep the clip in place.
N
Keep the tool in a safe place, as you
will need it to open the strap clips
when removing the strap.
5
Pass the clip through the eyelet.
Rotate the clip fully through the eye-
let until it clicks closed.
6
Fasten the strap.
Insert the strap through a protective
cover and strap clip and fasten the
buckle as shown.
O
To avoid dropping the camera, be
sure the strap is correctly secured.
Strap clip
Buckle
Repeat the above steps for the second eyelet.
To Next Page
Loading...
