Color monitor 21P3
A26361-K618-Z100-2-5E19 English - 9
Ê Plug the power cable supplied into the power connector of the monitor.
Ê Plug the power connector of the monitor into a properly grounded power outlet.
Ê Plug the power connector of the system unit into a properly grounded power outlet.
i
When you start working with your monitor for the first time you should install the
appropriate graphics drivers for your application software. Details of how to do this are
provided in the documentation on your screen controller/the associated driver software.
Operation of the monitor
3
2
1
1 = Control panel with buttons for screen
setting
2 = Power indicator
3 = ON/OFF switch
Switching the monitor on
Ê Press the ON/OFF switch (3).
The power indicator (2) lights up green when the system unit is turned on.
i
If your PC has a power management function (energy-saving mode), you should read the
"Notes on power managemen
" of the monitor in this chapter.
Each time a mode change is made, the monitor briefly displays the new resolution and
refresh rate. At system startup, it is normal that several changes of mode are made when
various programs are called automatically. Do not be confused by the unusual displays.
They are not error messages.
Switching the monitor off
Ê Press the ON/OFF switch (3).
The power indicator (2) is dark.
To Next Page
Loading...
Need help?
General
