Color monitor 21P3
A26361-K618-Z100-2-5E19 English - 19
Tilting and turning area
5°
13°
90°
90°
Error handling
Should an error occur, first check the following points. If the distortion is still not eliminated, the
monitor should, if possible, be checked on another PC and/or with another data cable.
If you cannot solve the problem, contact our Help Desk.
The display is too small or not centered
The monitor recognizes an undefined mode (see "Technical data").
Ê Adjust the picture size and position (see "Operation of the monitor").
Color displacements, color distortions
Ê Degauss the monitor (see "Operation of the monitor").
Striped picture or dull, blurred picture
Ê Switch the moiré reduction function on (see "Operation of the monitor").
Flickering picture
Ê Set an ergonomic refresh rate (≥ 75 Hz) using the PC software (see documentation for your PC
or your screen controller/graphics card).
No display (power indicator does not light)
Ê Check whether the monitor is switched on.
Ê Check whether the power cable on the monitor is connected correctly.
Ê Check whether the mains socket is live.
To Next Page
Loading...
Need help?
General
