Operation
Displays on the machine
Operational dis playMachine
The displays appear on the front of the casing.
2
1
1 = Memory card reader status display 2 = Operational display
Memory card reader status display
• The display lights up continuously: A memory card has been inserted.
•Thedisplayflashes: The memory card is being accessed.
• The display remains unlit: There is no memory card in the reader.
Operational display
Operational dis play
Do not disconnect the machine from the mains whilst in power-saving
mode, otherw ise data may be lost.
• The display lights up white: The machine is switched on.
• The display flashes white: The machine is in power-saving mode. After switching
on at the on/off switch the machine switches on or reverts to the status it was
in before power-saving m ode was initiated.
• The display flashes yellow: The hard disk is being accessed.
• The display remains unlit: The machine is not connected to the mains or is not ready for
operation. If the m achine is ready for operation, it can be switched on at the on/o ff switch.
10600985329, edition 1 English - 13
To Next Page
Loading...
Need help?
General
