64
Table 3-3 shows the names of the menu fields
for the Boot Options submenu,all of the
options for each field,the default settings and
a description of the field’s function and any
special information needed to help understand
the field’s use.
Summary screen: Enabled; Disabled Disabled Enables and disables the display of a screen containing a summary
of the configuration of the system.When enabled this screen
appears after the completion of Power On Self Test (POST) and
before the operating system is loaded.
Boot-time Enabled; Disabled Disabled Enables and disables the display of a screen containing diagnostic
Diagnostic Screen information as it is detected by the Power On Self Test (POST).
Menu Field Options Default Description
Table 3-3 Fields, Options and Defaults for the Boot Options Submenu
Exiting from the Main Menu
When you have finished setting the parameters
on this menu, you can either exit from the
setup utility, or move to another menu. If you
wish to exit from the setup utility,press the
Esc key or use the cursor keys to go to the Exit
menu.If you wish to move to another
menu,use the cursor keys. See Navigating
Through the Setup Utility on page 55 for
more information.
To Next Page
Loading...
Need help?
General