Fujitsu 735Dx - Advanced Menu - Setting Device Controls; Advanced Menu - Setting Device Feature Controls

C o n f i g u r i n g Y o u r L i f e B o o k 7 0 0 S e r i e s
L i f e B o o k 7 0 0 S e r i e s f r o m F uj i t s u
65
Table 3-4 shows the names of the menu fields
for the Advanced Menu,all of the options for
each field, the default settings and a description
of the field’s function and any special informa-
tion needed to help understand the field’s use.
ADVANCED MENU – SETTING
DEVICE FEATURE CONTROLS
The Advanced Menu allows you to:
■
Set the I/O addresses for the serial and
parallel ports.
■
Set the communication mode for the
parallel port.
■
Set an audio function I/O address,interrupt
level and DMA channel.
■
Select between the display panel and an
external CRT display.
■
Enable or disable compensation for
your display.
■
Set the I/O address for PCIC.
■
Set the docking parameters.
Follow the instructions for Navigating
Through the Setup Utility to make any changes.
(See page 55.)
Figure 3-4 Advanced Menu