Remove the 4 mounting screws
06-03
Screws
FILTER PCB
ACTPM
INVERTER PCB
6. INVERTER PCB, FILTER PCB and ACTPM removal
Open the CONTROL BOX (MAIN).
Remove the spacers.
(8 places)
Remove the connectors and screws.
Screws
(AC IN)
Earth screw
Spacers
6-1. FILTER PCB removal
Note the tightening torque
at the installation.
Tightening torque is 2.5 + 0.2N m.
(except for the earth screw)
-
To Next Page
Loading...
