06-10
Remove the Thermistor (comp.temp.)
and Thermistor (Discharge).
Remove the heat insulations.
Remove the COMP BOLTS.
(3 places)
Thermistor (comp. temp.)
Thermistor (Discharge)
Heat insulation
Cut the Discharge pipe in this range. Cut the Suction pipe in this range.
Remove the COMPRESSOR.
Range
Range
Remove the TERMINAL COVER. Remove the CRANK CASE HEATER.Remove the 3 mounting screws
of TERMINAL.
[ U : RED, W : BLACK, V : WHITE ]
Caution
Keep their shape better.
There is a possibility of catching fire to oil when removing
by the welding without cutting it.
To Next Page
Loading...
