Fujitsu AOU48RLXFZ - Page 230

6. SYSTEM DESIGN
SW5 setting forbidden

(

...Factory setting)
SW5

OFF Fixed at OFF
ON Setting forbidden
SW6 setting

Memory backup setting (Wired remote controller only) ●
Set to ON to use batteries for the memory backup.
If batteries are not used, all of settings stored in memory will be deleted if there is a power
failure.
(

...Factory setting)
SW6 Memory backup

OFF Invalidity
ON Validity
Never turn it ON in the case of simple remote controller.
- (06 - 76) -
SYSTEM DESIGN SYSTEM DESIGN