6. SYSTEM DESIGN
INSTALLATION
Mounting of indoor unit
Please refer to the installation manual provided with the indoor unit for mounting. ●
Please refer to the diagram below for installation height. ●
When installing this product to existing indoor units, please adjust the installation height of the ●
indoor units to height 230-235mm (9-1/16 to 9-1/4in.)
Installation of the fresh air intake kit
CAUTION
Installing the Fresh Air Intake Kit with the wrong direction is a cause of water leakage.
Provisionally attach the “DRAIN”, “PIPE” of the Fresh Air Intake Kit to the indoor unit foam- ●
sealed “DRAIN”, “PIPE”, following the direction of the indoor unit, using the metal fittings of
the combined diagram.
230 - 235
(9-1/16 to 9-1/4)
Indoor unit
Fresh air intake kit
Metal hanging fastener
Unit : mm (inch)
Ceiling
Metal fittings x 2
"DRAIN"
"DRAIN"
"PIPE"
"PIPE"
Bolt x 4
- (06 - 122) -
SYSTEM
DESIGN
SYSTEM
DESIGN
To Next Page
Loading...
