To Next Page

To Previous Page

- (01 - 30) -

WALL MOUNTED TYPE

ASU9-15RLS3

WALL MOUNTED TYPE

ASU9-15RLS3

10) Heat Insulation condition (building insulation)

Heat insulation conditions differ according to the installed environment.

Standard insulation "00" allows system to rapidly respond to the cooling or heating load

changes. High insulation "01" is when the heat insulation structure of the building is high and

does not require system to rapidly respond to cooling or heating load changes.

When High insulation "01" is selected;



Overheating (overcooling) is prevented at the start-up.



All room temp. control settings (Function 30, 31, 92, 93) will reset to No correction [0.0°F

(0.0°C)].

(



... Factory setting)

Function number Setting value Setting description

00 Standard insulation



01 High insulation

NOTE:

When changing Function 95, perform this setting before other Room temp. control settings (Function 30, 31, 92,

93). If Function 95 is not set rst, Room temperature control settings (Function 30, 31, 92, 93) will be reset and

you must re-do them again.

Fujitsu AOU9RLS3 User Manual

Other manuals for Fujitsu AOU9RLS3